TI SN65HVD08DR Drop-in Alternative – Slkor SL65HVD08DR Transceiver

TI SN65HVD08DR Drop-in Alternative – Slkor SL65HVD08DR Transceiver

PD(mW)：470mW
VOD(V)：5.5V
VOC(V)：3V
IOSD(mA)：250mA
Package：SOP-8





Description

l SL65HVD08 is a 3.0V~5.5V power supply, the contact discharge voltage of A/B is ±16kV, the fault protected voltage is ±15V, half-duplex, low power, RS485 Transceiver. SL65HVD08 fully meets the TIA/EIA-485 standard. SL65HVD08 includes a driver and a receiver, both of which can be enabled and disabled independently. When both are disabled, the driver and receiver outputs are high resistance state.
l SL65HVD08 has a 1/8-unit-load receiver input impedance, that allows up to 256 transceivers on the bus. The SL65HVD08 allowing error-free data transmission up to 10Mbps.
l SL65HVD08 has a working voltage range of 3.0V to 5.5V and has the functions of fail-safe, overtemperature protection, current-limiting protection and overvoltage protection.

Features

l 3V~5.5V power supply, half-duplex

l ESD protection for bus terminals: contact discharge ±16kV

l Bus fault tolerance and withstand voltage reach ±15V

l 1/8-unit-load, allows up to 256 transceivers on the bus

l Driver short-circuit out protection

l Overtemperature protection function

l Low power shutdown function

l Receiver open-circuit failure protection

l Strong anti-noise ability

l Integrated transient voltage suppression function

l Data transmission up to 10Mbps in an electric noise environment


Pin to Pin alternative reference

1. DC-DC Regulators

For power management applications, Slkor provides direct replacements for several Texas Instruments DC-DC regulators:

  • LM2575S-5.0 → Slkor Equivalent: LM2575S-5.0 (TO-263-5)
  • LM2576S-5.0 → Slkor Equivalent: LM2576S-5.0 (TO-263-5)
  • LM2596S-5.0 → Slkor Equivalent: LM2596S-5.0 (TO-263-5)

2. Gate Driver ICs

Gate driver ICs are crucial for controlling power transistors efficiently. Slkor alternatives include:

  • UCC27511DBVR → SL27511 (SOT-23)
  • UCC27525D → SL27525 (SOP-8)
  • UCC27517DBVR → SL27517 (SOT-23)
  • UCC27524 → SL27524 (SOP-8)
  • UCC27523 → SL27523 (SOP-8)
  • UCC5350 → SL5350SDR / SL5350MDR (SOP-8)
  • UCC27531DBVR → SL27531 (SOT-23-6)
  • UCC27624DR → SL27624MS (SOP-8)
  • UCC27714 → SL27714 (SOP-14)

3. General-Purpose Operational Amplifiers (Op-Amps)

Slkor provides replacements for widely used TI op-amps:

  • RC4558DRG4 → SL4558S (SOP-8)
  • LM124DR → LM124D (SOP-14)
  • LM224DR → LM224D (SOP-14)
  • LM324DR → LM324D (SOP-14)
  • LMV358QD → LMV358 (SOP-8)
  • LM2904P → LM2904 (DIP-8)
  • TLV9062 → SL9062C (SOP-8) / SL9062D (SOT-23-8L)

For precision applications, Slkor offers:

  • OPA333 → SLA333 (MSOP-8)

4. Linear Regulators (LDOs)

Slkor provides equivalent alternatives to TI's low-dropout (LDO) regulators:

  • LP5907MFX-3.3 → SL9013M33SE (SOT-23-5)
  • LP2992IM5-3.3 → SL54M33SE (SOT-23-5)
  • TLE4275-Q1/TPS7B87-Q1 → SL4275 (TO-252-5)
  • TLE4275-Q1 → SL4275-G (TO-263-5)
  • TLE4264/LM2936Q → SL4264-2 (SOT-223)
  • TL720M05-Q1 → SL42744D (TO-252-3)
  • TPS7B86-Q1 → SL42764 (TO-252-5)

5. Real-Time Clock (RTC) & Timers

For applications requiring precision timing:

  • LM555CMX → SL555S (SOP-8)

6. Logic Gates

Logic ICs are essential for digital circuit design. Slkor equivalents include:

  • SN74HC164DR → 74HC164D (SOP-14)
  • CD4001BM → CD4001BM (SOP-14)
  • SN74LVC1G11 → 74LVC1G11S6 (SOT-23-6)
  • SN74LVC1G10 → 74LVC1G10S6 (SOT-23-6)
  • SN74LVC1G32 → 74LVC1G32S5 (SOT-23-5)
  • SN74LVC1G27 → 74LVC1G27S6 (SOT-23-6)
  • SN74LVC1G34 → 74LVC1G34S5 (SOT-23-5)
  • SN74LVC2G34 → 74LVC2G34S6 (SOT-23-6)

7. CAN and RS-485 Transceivers

For communication and networking applications, Slkor offers:

  • SN65HVD230DR → SL65HVD230DR (SOP-8)
  • SN65HVD232DR → SL65HVD232DR (SOP-8)
  • SN65HVD233DR → SL65HVD233DR (SOP-8)
  • SN65HVD234DR → SL65HVD234DR (SOP-8)
  • SN65HVD08DR → SL65HVD08DR (SOP-8)

8. Analog Switches

For signal switching applications, Slkor provides:

  • TS5A3157 → SL3157XC6 (SC-70-6) / SL3157XT6 (SOT-23-6)

9. Level Converters

For voltage translation applications:

  • TXS0101 → SL0101S6 (SOT-23-6)
  • TXS0102 → SL0102S8 (SOT-23-8)

For more information please reach out : claire@slkormicro.com

评论

发表评论

此博客中的热门博文

【Hot seller】SL4949 Linear Voltage Regulators (LDO),Alternative equivalent for STMicroelectronics L4949 | Slkor SL4949 Linear Voltage Regulators (LDO)

图片
Description SL4949 is a low voltage drop  LDO  voltage regulator with the output voltage of 5V, integrated with the power on reset function and the input voltage monitoring function in the chip. SL4949 can provide stable supply voltage for the control system of micro-processors,with typical output current as high as 100mA and transient input voltage of 42V,and is very suitable for applications in working environment of automotive electronics. Supporting Reset output,it can be applied to logic control of micro-processors,in addition, it supports Sense monitoring,and can output the waming signal before the output of the reset signal.Reasonable use ofthe Sense monitoring function can make micro-processors conduct necessary treatment measures before the stop of micro-processors with Reset. Characteristics ●   Working voltage ranges: 5.5V~42V ●   Extremely low quiescent current of 80uA in the standby ●   High-acc...
阅读全文

【SLKOR semiconductor】Protecting Automotive Electronics: SLKOR's SLESD5311N-2TR TVS Diode in Focus

图片
 Introduction   With the rapid advancement of technology, automobiles are making significant strides toward intelligence and connectivity. Modern in-car systems integrate numerous electronic devices such as entertainment systems, navigation systems, and autonomous driving sensors, all of which demand high voltage stability. However, during vehicle operation, various transient overvoltage threats may occur, such as those caused by engine ignition, lightning induction, and power switching. These overvoltage pulses can severely damage onboard electronics, causing system failures and negatively affecting driving safety and the overall driving experience. The transient voltage suppression  diode  ( TVS ) is an efficient overvoltage protection device that quickly responds to transient overvoltage events, clamping the voltage to a safe level and protecting automotive electronics from damage. The SL ESD 5311N-2TR, as a high-performance  TVS   diode , has broad...
阅读全文

Slkor LM393: A Cost-Effective Alternative to TI LM393DR and ONSEMI LM393DR2G

图片
 Slkor LM393: A Cost-Effective Alternative to TI LM393DR and ONSEMI LM393DR2G V cc ：±18~36V V IO ：±3mV I IB ：25nA V I ：-0.3~36V T RE ：1.3μs Package：SOP-8 Description LM393 is an integrated circuit comprising two independent, high-precision voltage comparators, characterized by low offset voltage, with a maximum of 2.0mV. It is designed to operate over a wide voltage range with single-supply voltage, though it can also function with dual-supply voltage configurations. Moreover, it maintains low power consumption regardless of the supply voltage magnitude. One of its distinctive features is its ability to operate with a single-supply voltage, with the common-mode input voltage range of the comparators approaching ground level. The main applications of the LM393 include limiters, simple analog-to-digital converters, pulse generators, square wave generators, delay generators, wideband voltage-controlled oscillators, MOS clock timers, multi-frequency oscillators, and high-level digital ...
阅读全文